Band saws

IMET BS 300 PLUS SHI semi-automatic bandsaw

38 463,00 zł net
No rating
Add to favorites

12 months of warranty
imet.jpg

Contact with a trader:
Krzysztof Penkowski
E-mail: krzysztof.penkowski@eurometal.com.pl
Telefon: 603 400 333

IMET BS 300 PLUS SHI semi-automatic cutting machine with a rigid, stable structure and a proven drive system. The precisely guided cutting band and the ability to cut at an angle ranging from -45° to +60° make the BS 300 PLUS SHI cutter a universal production machine.

Quantity
Add to cart

IMET BS 300 PLUS SHI semi-automatic cutting machine with a rigid, stable structure and a proven drive system. The precisely guided cutting band and the ability to cut at an angle ranging from -45° to +60° make the BS 300 PLUS SHI cutter a universal production machine.
The arm is lowered hydraulically, the feed value (descent speed) is regulated by a hydraulic choke. Precise belt guidance through sintered carbide plates, a rotating console on which the machine arm is mounted, a 27 mm high cutting band and a chip removal brush ensure excellent cutting results. The machine has a built-in hydraulic and cooling system.
  • Working feed: hydraulic arm drop; smooth regulation
  • Arm lifting: hydraulic
  • Angle cutting: right 0° - 45° - 60°; left - 45°
  • Cutting band dimensions: 3370 x 27 x 0.9 mm
  • Band speed: 2 cutting speeds 37/74 m/min
  • Vice – hydraulic clamp

Standard equipment:

  • The BS 300 PLUS is equipped with a large diameter work area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right, with a scale plate to identify and set different angles.
  • The vice has adjustable guides that can be moved freely along the work table, allowing for quick approaching and camping.
  • The machine's saw frame is made of rigid tubular cast iron, with 320 mm pulleys, high blade tension of 1700 kg/cm2 and prevention of excessive blade tension thanks to front adjustment and micro-switch controller.
  • Blade to protect the blade, allowing easy access for maintenance when needed; blade guide system with hard pads, additional side bearings ensure perfect blade positioning.
  • Safe start thanks to a button on the handle with a warning light informing the user about the correct functioning of the machine. The coolant tank and electric pump are located inside the floor stand.
  • If necessary, an electronic variable blade speed inverter allows the operator to use the keyboard to adjust the machine to cut a wide range of materials and different cross-sections. The speed is changed using an inverter and does not affect the engine power even at low speeds.
Optional equipment (additionally paid):
  • A minimum lubrication system can be required for all Imet machines, this avoids the dispersion of liquid refrigerant typical when using emulsifying oil, this does not in any way affect the life of the blade.
  • Adapter for synchronizing the RTP/RTD table with the saw movement.
  • Laser beam.
  • Hydraulic vice pressure reducer (only for SHI version).
  • Only in SHI version, hydraulic device for cutting bundles (max. 250x130mm, min. 85x10mm).
  • Foot pedal with 3.3 m cable (only for SHI version).

Technical data Unit Value
The width of the cutting band [mm] 27
Vise opening width [mm] 300
The dimensions of the cutting band [mm] 2765x27x0.9
Cutting band speed [m/min] 35/70
Cutting band motor power [kW] 1.5/1.8
Working height [mm] 940
Coolant tank capacity [l] 20
Hydraulic reservoir capacity [l] 12
Dimensions [mm] 1230x1700x1750
Weight [kg] 412

Recommended

Band saws
398 802,00 zł
No rating
Band saws
25 629,00 zł
No rating

Newsletter

Sign up for our newsletter.

Subscribe films and movies at our YouTube channel.
Konsultant