Mechanical presses
EUROMET JL21-125T MECHANICAL PRESS
268 275,00 zł net
No rating
12 months of warranty
Contact with a trader:
Krzysztof Penkowski
E-mail: krzysztof.penkowski@eurometal.com.pl
Telefon: 603 400 333
Krzysztof Penkowski
E-mail: krzysztof.penkowski@eurometal.com.pl
Telefon: 603 400 333
EUROMET JL21 series eccentric presses have a PLC controller as standard. The crankshaft is positioned in the longitudinal direction. The presses use a combination of a pneumatic, dry friction clutch and a brake, which makes the stroke engagement smooth.
Quantity
Add to cart
EUROMET JL21 series eccentric presses have a PLC controller as standard. The crankshaft is positioned in the longitudinal direction. The presses use a combination of a pneumatic, dry friction clutch and a brake, which makes the stroke engagement smooth.
The gear train operates in an oil bath and is splash lubricated. The slider has the shape of a cuboid and moves along guides. A hydraulic overload safety device is mounted on the slider. The tool setting is regulated by an electric motor. The press is equipped with a pressure accumulator, automatic feed shaft and light curtain.
The pressure of the presses ranges from 25 tons to 250 tons. The maximum height of a set of dies is from 250 to 500 mm. Other functional parameters on request.
The press has an EC type examination issued by a notified body.
Standard equipment:
- Anti-crash light curtain
- Slider stroke adjustment
- Large table with T-slots
- Overload fuse
- Air operated clutch
- PLC driver
- Smooth regulation of the number of jumps
- User manual in English
- CE declaration of conformity, type examination
Optional equipment (for an additional fee):
- Feeder
- Uncoiler
- Straightener
- Detail ejector
- Rewinder
| Technical data | Unit | Value |
|---|---|---|
| Pressure | [KN] | 1250 |
| Stroke under nominal load | [mm] | 6 |
| Ram stroke | [mm] | 10 - 160 |
| The number of strokes | [1/min] | 40 - 60 |
| Die set height max | [mm] | 350 |
| Die height adjustment | [mm] | 80 |
| Recess | [mm] | 350 |
| Wall spacing | [mm] | 760 |
| Working table width | [mm] | 1150 |
| The length of the working table | [mm] | 680 |
| Thickness of the working table | [mm] | 140 |
| Worktable hole diameter (outer) | [mm] | Ф260 |
| Worktable hole diameter (depth) | [mm] | 50 |
| Worktable hole diameter (internal) | [mm] | Ф140 |
| The width of the bottom of the slider | [mm] | 810 |
| Length of the bottom of the zipper | [mm] | 500 |
| The diameter of the hole for the stamp | [mm] | Ф60 |
| The depth of the hole for the stamp | [mm] | 80 |
| Engine power | [KN] | 11 |
| Overall dimensions (WxLxH) | [mm] | 1850x1450x3250 |
| Weight | [kg] | 11500 |
Recommended
Newsletter
Sign up for our newsletter.
