Prasy mimośrodowe EUROMET serii JL21 posiadają w standardzie sterownik PLC. Wał wykorbiony ustawiony jest w kierunku wzdłużnym. W prasach zastosowano połączenie ciernego sprzęgła pneumatycznego, suchego oraz hamulca, przez co załączanie skoku jest płynne.
Technical data | Unit | Value |
---|---|---|
Pressure | [KN] | 1600 |
Stroke under nominal load | [mm] | 6 |
Ram stroke | [mm] | 6 - 160 |
The number of strokes | [1/min] | 35 - 50 |
Die set height max | [mm] | 350 |
Die height adjustment | [mm] | 110 |
Recess | [mm] | 380 |
Wall spacing | [mm] | 810 |
Working table width | [mm] | 1300 |
The length of the working table | [mm] | 740 |
Thickness of the working table | [mm] | 150 |
Worktable hole diameter (outer) | [mm] | Ф300 |
Worktable hole diameter (depth) | [mm] | 50 |
Worktable hole diameter (internal) | [mm] | Ф260 |
The width of the bottom of the slider | [mm] | 920 |
Length of the bottom of the zipper | [mm] | 580 |
The diameter of the hole for the stamp | [mm] | Ф65 |
The depth of the hole for the stamp | [mm] | 90 |
Engine power | [KN] | 15 |
Overall dimensions (WxLxH) | [mm] | 2250x1560x3765 |
Weight | [kg] | 15000 |