Cookie files on www.eurometal.org.uk website information.

www.eurometal.org.uk Webpage is using cookie files in statistics and advertising purpose. You can change settings that apply to cookie files in your own web browser. While using this webpage, you accept cookie files usage. Eurometal LTD does not sell to natural persons and does not process natural persons data

Eurometal Polska Eurometal.com.pl in english Eurometal.com.pl deutsche Eurometal по - русски Eurometal på svenska

Send inqury


Eurometal Sp. z o.o. nie prowadzi sprzedaży osobom fizycznym, ani nie przetwarza danych osób fizycznych.

KENT KGS SD automatic surface grinding machines

KENT KGS SD automatic surface grinding machines are based on PLC control system with touchscreen and servo drive for vertical spindle feed and worktable cross feed, depending on type of SD control system:

 KGS SD1 – PLC control system with touchscreen and servo drive for vertical spindle feed with ability of programming full grinding operation – rough grinding, sine grinding and sparkout. Minimal automatic vertical feed reaching 0,001mm makes this type of machines suitable for very precise grinding operations.

 KGS SD2 – Two servo drive motors for vertical spindle feed and cross table feed. Thanks to precise cross table travel control, movement like 0,001mm can be reached. It is a perfect solution for vertical surface of detail grinding, groove and key grinding.

Every KGS surface grinder, equipped with hydraulic longitudinal worktable feed can be equipped with SD1 or SD2 control system.

 

Standard equipment:

  • Grinding wheel
  • Back splash guard
  • Permanent magnetic table for KGS 818, KGS 1020, KGS 1024
  • Electromagnetic table for KGS 1224, KGS 1632, KGS 1640, KGS 510, KGS 515, KGS 615, KGS 620
  • PLC control with touchscreen – Siemens
  • Servo drive for vertical feed in SD1 machines - Siemens
  • Servo drive for vertical feed and cross feed in SD2 machines - Siemens
  • Static wheel balancer
  • CE conformity declaration
  • Operation manual  

Additional equipment: 

  • UPS unit
  • Digital readout for 2 axes 
  • Overhead parallel dresser
  • Angle dresser
  • Basic type magnetic separator
  • Cooling system with magnetic separator and paper filter

 

Technical data

KGS 818 SD1/SD2

KGS 1020 SD1/SD2

KGS 1224 SD1/SD2

KGS 1632 SD1/SD2

KGS 1640 SD1/SD2

Worktable dimension

200 x 460 mm

255 x 510 mm

300 x 600 mm

400 x 800 mm

400 x 1000 mm

Longitudinal table travel

510 mm

575 mm

660 mm

920 mm

1120 mm

Cross table travel

250 mm

280 mm

370 mm

450 mm

450 mm

Maximal distance from table surface to spindle center

530 mm

535 mm

540 mm

600 mm

600 mm

Table load

150 kg

300 kg

420 kg

700 kg

700 kg

T-slot

1 x 14 mm

1 x 14 mm

1 x 14 mm

3 x 14 mm

3 x 14 mm

Table feed

0 – 25 m/min

5 – 25 m/min

5 – 25 m/min

5 – 25 m/min

5 – 25 m/min

Crossfeed handwheel (1 scale)

0,02 mm

0,02 mm

0,02 mm

0,02 mm

0,02 mm

Crossfeed handwheel (1 rev)

5 mm

5 mm

5 mm

5 mm

5 mm

Automatic crossfeed (SD1)

0,5 – 12 mm

0,5 – 12 mm

0,5 – 12 mm

0,5 – 12 mm

0,5 – 12 mm

Automatic crossfeed (SD2)

0,001/0,01/0,1 mm

Rapid crossfeed

780 mm/min

790 mm/min

790 mm/min

790 mm/min

790 mm/min

Grinding wheel dimension

200 x 25 x 32 mm

200 x 25 x 32 mm

355 x 40 x 127 mm

355 x 40 x 127 mm

355 x 40 x 127 mm

Spindle speed

2850 RPM

2850 RPM

1450 RPM

1450 RPM

1450 RPM

MPG handwheel feed

x1, x10, x100

Min. automatic  vertical feed

0,001 mm

Spindle motor power

1,5 kW

2,2 kW

4 kW

5,5 kW

5,5 kW

Hydraulic pump motor

1,5 kW

1,5 kW

2,2 kW

2,2 kW

2,2 kW

Coolant pump motor

90 W

90 W

90 W

90 W

90 W

Crossfeed motor (SD1)

60 W

60 W

90 W

90 W

90 W

Floor space

2500 x 1900 mm

1900 x 2300 mm

2600 x 2500 mm

3600 x 2600 mm

3600 x 2600 mm

Weight

1320 kg

1680 kg

1910 kg

2850 kg

2950 kg

 

 

Parameters

KGS 510 SD1/SD2

KGS 515 SD1/SD2

KGS 615 SD1/SD2

KGS 620 SD1/SD2

Worktable dimension

500 x 1000 mm

500 x 1500 mm

600 x 1500 mm

600 x 2000 mm

Longitudinal table travel

1140 mm

1600 mm

1600 mm

2230 mm

Cross table travel

540 mm

570 mm

660 mm

660 mm

Maximal distance from table surface to spindle center

590 mm

590 mm

600 mm

600 mm

Table load

700 kg

700 kg

800 kg

1500 kg

T-slot

3 x 16 mm

3 x 16 mm

3 x 16 mm

3 x 16 mm

Table feed

5 – 25 m/min

5 – 25 m/min

5 – 25 m/min

7 – 25 m/min

Crossfeed handwheel (1 scale)

0,02 mm

0,02 mm

0,02 mm

0,02 mm

Crossfeed handwheel (1 rev)

5 mm

5 mm

5 mm

5 mm

Automatic crossfeed (SD1)

0,5 – 12 mm/min

0,5 – 12 mm/min

0,5 – 12 mm/min

0,5 – 12 mm/min

Automatic crossfeed (SD2)

0,001/0,01/0,1 mm

Rapid crossfeed

1250 mm/min

1250 mm/min

1250 mm/min

1250 mm/min

Grinding wheel dimension

355 x 40 x 127 mm

355 x 40 x 127 mm

355 x 50 x 127 mm

355 x 50 x 127 mm

Spindle speed

1450 RPM

1450 RPM

1450 RPM

1450 RPM

MPG handwheel feed

x1, x10, x100

Min. automatic  vertical feed

0,001 mm

Spindle motor power

5,5 kW

5,5 kW

7,5 kW

7,5 kW

Hydraulic pump motor

2,2 kW

2,2 kW

5,5 kW

5,5 kW

Coolant pump motor

90 W

90 W

90 W

90 W

Crossfeed motor (SD1)

370 W

370 W

370 W

370 W

Floor space

4445 x 2200 mm

5810 x 2445 mm

5810 x 2445 mm

6200 x 2700 mm

Weight

5000 kg

6000 kg

6250 kg

8500 kg

 

2016 © Eurometal Our suppliers:

EUROMETAL Sp. z o.o. 80-297 Banino K/Gdańska Miszewko 41; tel. (+48 58) 550 08 20; tel. (+48 58) 550 08 21; fax (+48 58) 550 08 19 eurometal@eurometal.com.pl 54.404782, 18.363004

Google+

Eurometal Sp. z o.o. reserves the right to make changes without notice. All published information does not constitute an offer within the meaning of Article 66 of the Civil Code.

All materials on this website are the property of Eurometal Sp. z o.o. Any reproduction in whole or in part (photos, descriptions, specifications) without written permission of Eurometal Sp. z o.o. is prohibited.