IMET BS 400 SHI Bandsaw
The machine can cut at an angle up to 60 ° right and 45 ° to the left and to regulate the speed of the feed arm. The cutter is the optimal solution for cutting both solid materials and profiles, eg. In the production of steel structures.
Semi-automatic cutter machine with a built-in hydraulic unit responsible for raising and lowering the arm, working vice and having adjustable cutting speed (infinitely adjustable - inverter - an option for an additional charge).
Semiautomatic hydraulic bandsaw, for medium and heavy steelwork, mitre cutting up to 60° left and 45° right. Hydraulic vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping. Easy stops at 0°, 45°, 60° left and 45° right. Adjustment of the blade tension from the front side of the saw-frame, checked by an end-stroke. Blade guides with hard metal pads, additional bearing for blade alignment. Steel saw frame with tubular section, pulleys 360 mm diameter.
Mechanical device (position sensor) that allows the saw frame to lower quickly toward the material and detect automatically the start-cut point. Connection element for loading table equipped with roller, 450 mm wide. Slide on the unloading side which can be transformed in connection for unloading table. Adjustable bar stop, blade-cleaning brush, bi-metal blade. Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection, motor absorption device. Possibility to connect a pedal to start the cutting cycle. Floor stand with room inside and door, removable chip collector, coolant tank and electro pump. Wide working space 460 mm diameter with rotating table integral with the saw frame to avoid incisions of the table, rotation on thrust ring with pre-loaded thrust bearing.
- The maximum cutting diameter: ø 310 mm
- Feed rate: drooping arm of gravity; infinitely adjustable
- Raising the arm: hydraulic
- cutting angle: Right 0 ° - 45 ° - 60 °; Left - 45 °
- Dimension knives: 4020 x 34 x 1.1 mm
- The belt speed 2 cutting speed 37/74 m / min
- Vice - hydraulic clamp
Standard equipment: cooling system:
- brush cleaning tape
- bimetallic strip - 1 pc. in the machine
- User manual in English
- CE certificate
Equipment for extra charge:
- roll feeders
- measure with the bumper
- infinitely adjustable cutting speed (inverter)
- oil mist lubrication system (Micronizer)
- laser pointer cutting line
- hydraulic clamp for cutting packages
- adjustability of the clamping vise
|Blade Motor Power||[kW]||1,5/2,2 kW/3x400 V|
|Height of the Work-table||[mm]||940|
|Dimensions ( B x L x H )||[mm]||1530x1787x2240|