IMET BS 300/60 AFI-E bandsaw
Electronic automatic bandsaw, hydraulically driven; mitre cutting from 0° to 45° left in automatic cycle and up to 60° left in semiautomatic cycle. Cast iron saw frame with tubular section. Hydraulic fixed vice. Adjustment of the blade tension from the front side of the sawframe, checked by an endstroke. Blade guides with hard metal pads, additional bearing for blade alignment. After setting the cutting length and the number of cuts, a trim cut is performed, then the bar is cut till the end.
Programming of all operations by means of the keyboard; machine status shown on display, including blade life and speed, piece counter, cycle time, motor absorption; and workinganomalies. Feeder with 300 mm opening, maximum single stroke 515 mm, minimum stroke 4 mm, selection of the number of cuts (1-9999) and feeder strokes (1-29) by means of the keyboard. Manual selection of the cutting length with digital reading and decimal accuracy. Connection for loading table with two vertical rollers, unloading slide/connection for unloading table for cut pieces. Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection. Removablechip collector tank, coolant tank with electro-pump, hydraulic unit with oil, blade-cleaning brush, bi-metal blade.
There is a possibility of retrofitting machines in additional accessories such as:
- roll feeders
- oil mist lubrication system (Micronizer)
- laser pointer cutting line
- The hydraulic clamp for cutting packages
- power regulator clamping vises
- infinitely adjustable belt speed (inverter)strain gauge for precise adjustment of belt tension
|Blade Motor Power||[kW]||1.5/1.8 kW/~3x400V, 50 Hz|
|Blade speed||[m/min]||35/70 m. min -1|
|Band dimensions||[mm]||2765 x 0.90 x 27 mm|
|Height of the Work-table||[mm]||880|
|Dimensions ( B x L x H )||[mm]||1850x1900x1990|