IMET BS 300/60 GH band saw

Machine 300/60 GH is a universal, manual bandsaw for use in every workshop. Feed arm is carried out by gravity. The value of the feed is controlled hydraulically. After completion of cutting by the band cutting stops. The saw can cut at an angle of 60 degrees. The band is carried out in fixed guides of the carbide.

Manual bandsaw for cuts from 0° up to 60° left of medium hardness material and medium productions. Blade guard for a rapid and easy replacement of the blade. Frontal vice with fast clamping, jaws height 130 mm and adjustable length stop. Easy stops 0° 45° and graduated plate to identify different angles. Blade guides with hard metal pads, additional bearing for blade alignment. Safe starter through buttom on the handle, warning light for the correct functioning. Floor stand with coolant-tank and electropump.

AUTOCUT GH version equipped with main switch with padlock closure, minimum tension coil, for thermic & magnetic protection and motor absorption device.

“3 Ways” Selector:
- A Manual cut
- B Self-brake manual cut
- C. Automatic cut with autonomous adjustable lowering and stopping microswitch at the end of the cut

Basic features:

• The maximum cutting diameter: ø 255 mm
• Feed rate: drooping arm of gravity; infinitely adjustable
• Raising the arm: Manual
• Cutting angle: Right 0 ° - 45 ° - 60 °
• Dimension knives: 2765 x 27 x 0.9 mm
• belt speed 2 cutting speed 35/70 m / min
• Vice: manually - fast clip

Standard equipment:

• cooling system
• bimetallic strip - 1 pc. in the machine
• user manual in English
• CE certificate

Equipment for extra charge:

• roll feeders
• oil mist lubrication system (Micronizer)
• strain gauge for precise adjustment of belt tension